Products

Fuji MoreZ MF Professional Hair Cutting Scissor is a high-level cutting tool. Convex edged blade combined with superior Cobalt Steel, smooth Ball Bearing Tension reduces friction to near zero, this allows user to power through any section of hair, with less thumb pressure, with out any fatigue.Gives an effortless cutting experience and excellent workmanship make it a winner. Highly Recommended

Naruto Maticline I Hair Cutting Scissor 6.8 inch. This long sightly offset  Naruto scissor is 6.8 inch,designed with Sintered Cobalt Alloy Steel, and disk bearing Tension system. Excellent for all around cutting, and scissor over comb and extra length to cut lines at the.Maticline I hair cutting scissor will cut with great precision, and good power.The quality of Naruto with its sintered steel, and artisan craftsmanship will allow you to cut any section with ease. Below is an image of the bearing disk tension system that will reduce friction and allow user to cut smoothly with less effort, and thumb pressure. Those seeking a quality long barbering scissor this is it.

YS Park 606 Parthenon hair comb is unique and special in that the end or tail of this comb acts as a finger and enables users to section hair.YS 606 has a parting (shortened) first tooth, and the flat top allows the comb to sit on the head at 90 degrees.Handle is designed with an ergonomic shape and fits firmly and comfortable in the hand, and does not slip.Teeth of comb are rounded this design allows for less tension on the hair which is less damaging than the average comb.

Kouho ARX Professional Hair Cutting Scissor fits your fingers very well with its anatomical thumb, giving any stylist great control, while cutting with great power. Designed with High Grade Cobalt Alloy Steel, the tension control system has an internal click Ball Bearing. This reduces friction allowing for smooth cutting with less thumb pressure, and no hand fatigue. Kouho ARX has a permanent finger rest, and points are fine.The ARX comes with our highest recommendation. Kouho ARX is Not Available 

Sizes: 6.0" - Barber style, 6.5" - Barber style, 7.0" - Barber style

Sizes: 6.3 inch - Straight

Naruto Royal Kingdom Stork Megane DB III scissor is mainly used for Slide, Stroke, and Chop cuts due to the structure, shape and size of the scissors. Megane DB III uses a dual bearing which has a shaft bearing to reduce friction, and an advanced Ball Bearing Disk to ensure smooth movement and to stabilize the blades. Exceptional performance from this great Naruto detail scissor.

Kokoro Green Series Professional Hair Cutting shear is a quality offset crane handle shear that offers an excellent value.This new Green series has extra blade refinement which allows for an improved cut and feel for the stylist.The crane handle will allow for a comfortable position with the elbow being lower, and this levels the wrist to prevent carpal tunnel. The Japanese Steel is vacuum heat treated which will ensure consistent cut with equal hardness throughout the entire blade.

Yuroshi WXB Black Titanium finish hair cutting scissor has a sharp convex edge designed with high quality 440 C Stainless Steel. WXB has an adjustable tension knob with spring plate to ensure smooth blade movement.

Shisato Regency S swivel Thumb Cobalt Hair Cutting shear combines high level performance with an artistic flair. Shisato Regency S is designed with Japanese Hitachi ATS-314 Cobalt Alloy Steel to give an excellent edge. Front blade is designed with a tapered K Blade or sometimes called Bamboo Blade this gives a smoother cut and is better for point cutting. Back blade is wider this will give better slide cutting.This shear is a superb dry cutting tool. Thumb rotates 360 degrees. Lifetime Warranty on Workmanship and Materials. Close Out Price on 5.5 Regency S 

Tara XF Hair Cutting Shear is composed of high quality Japanese stainless steel, removable finger rest, with slightly larger fingers holes than the XC series. Handle is straight not offset. Tara XF is Light weight smooth cutting shear with convex edge blades. Made in Japan.

Sizes: 5.8 inch, 6.2 inch

Sizes: 5.5 inch

Kasho SASA Hair Thinning shear is Japanese for bamboo leaf and these shears feature wider blades with a more rounded profile. The Green Series SASA Blending Shears are designed for exquisitely smooth wet or dry fine cutting. SASA has V-10 Cobalt Alloy steel for a great edge and smooth blending. The 38 tooth features a new step-down design where the notch at the end releases the hair after cutting. The base of the teeth step-down smaller to leave more room for the uncut hair to slide smoothly through when you pull the shears out, which means there is less chance of pulling or snagging the hair. The SASA  a comfortable offset handle design.

Kouho KGT-SNL hair thinning scissor with 27 Teeth is designed with very high grade stainless steel. The KGT has a removable finger rest. The craftsmanship is excellent on each Kouho scissor, and the KGT will give a high level of performance. Kouho KGT blender is comfortable in the hand and easy to control. Each tooth on the KGT Teeth are designed with 3 steps and will reduce most demarcation lines and release easily when your drag on the hair. Kouho KGT is an excellent choice of a high level multi purpose use blending tool. This is the same blender are the Kouho ARX but with a straight handle.
Kouho KGT-SNL Thinner is No Longer Available.

Mizutani ACRO Z DUAL ZD-4 dual thinning scissors enabled the stroke cut technique. Even when you cut hair with moving scissors, hair does not jam because there is no cutting blade. The Z Dual is not only for blending hair, it gives hair an airily and movement to the style. Acro Dual leaves no line when you use this tool to blend and remove weight.This is the new thinning scissors, you can use on your clients, and  can keep the style long after hair grows. The straight ZD-3 or offset ZD-4 the handles are easy to fit to your hand, and very comfortable. ZD-4 third generation blending scissors generate micro- bunches that give the tips of the hair a three-dimensional feel. With these thinning scissors, you can now easily produce sculpted three dimensional tips.

Matsuzaki VDR 4 Star Cobalt Thinning shear has been redesigned now this blender to features a multi 3 step tooth configuration on the VDR6030F  for easy cut an drag capability. Made with cobalt alloy steel. Now this blender has two new options with the addition of the VDR6020F a 20 Tooth design with a two step tooth design and cut Ratio of 20%, and the VDR6010F a 10 Tooth 2 step tooth design with 10% cut Ratio. The VDR30F would make an excellent all purpose blender.

Naruto Kingdom Stork Nisuki Aeroline Two Handed S 29 Tooth Hair Thinning Scissors are used mainly used for Slide, Stroke, and Chop cuts due to the structure and shape of the scissors. At 5.6 inch user has great control for detail work. Designed with a special Powered Martensite Cobalt Alloy Steel with other alloys this thinner has a dual bearing tension system. One bearing is the shaft bearing to reduce thumb pressure, and a disk baring the ensure smooth movement and operation of the blade movement. Attention to detail is the best, and straight handle lets you flip these Naruto blenders if you desire. All Naruto products are made with simply the best craftsmanship. Our highest Recommendation on All Naruto Scissors. The S29 teeth have been desinged to give a Cut Ratio 20-25% slightly more than the S-29.T.

Kokoro Ivory Series 33 Tooth Hair Thinning shear is a quality professional offset handle thinner that offers an excellent value. This new Ivory series has extra blade refinement which allows for an improved cut and feel for the stylist. The offset handle will allow for a comfortable position with the elbow being lower, and this levels the wrist to prevent carpal tunnel. The Japanese 440C Stainless Steel is vacuum heat treated which ensures consistent cut with equal hardness throughout the entire blade.

Yasaka YS 300 30 Tooth ATS-314 Cobalt Hair Thinning Scissors is a convex edge texturing shear made in Japan with high quality Cobalt Alloy steel. Yasaka shears continue to be popular for their durability and consistent performance over the years while remaining an excellent value due to their reasonable price. Many of the Yasaka shear designs were classic and remain mostly unchanged today with some minor up grades.

YS Park GT11 Guide Hair Comb has the same dimensions and features as the YS Park 111 Tail comb but the GT11 includes teeth that are marked or colored at two points on the teeth,  one mark at 4 cm ( 1.574 inches) and one at 8 cm 3.149 inches). The mark at the 4 cm is in Blue, and the mark at the 8 cm is marked in Red. These marks are  very useful and offer an excellent training tool with sectioning and parting techniques. 

Yuroshi CT-30 Hair Thinning Scissor with Curved C Type Teeth that have a unique varied width tooth design. This will give a more natural texture to a finished look. Each tooth has been cut in a multiple step design. This hides the lines, and cuts with less effort, and releases from the hair with ease. Yuroshi thinners have excellent craftsmanship and great attention to detail, and we consider them an great value.You will be impressed with any Yuroshi product.

YS Park 103 Metal Tail Hair Comb. Spacing between each tooth is gradually narrowed by 1/100 mm from the previous tooth as you move away from the tail. With this design combined with the parting head (the first tooth of the comb is shortened), it creates equal tension through the length of the comb, allowing the user to wind hair quickly. What Makes This Comb Special is a curved top for smaller sections that may be needed when braiding or applying extensions.




 

YS Park 201 Barber Comb is made from Ultem-plastic to be durable, and very flexible, and heat resistant to 428°F  . Specially sized to suit all needs. With a super light body, the handles comfort grip is engineered with air holes built-in to allow great flexibility, providing stylists incredible control over every stroke. Comfort tactile grip, dimpled for an organic feel. The YS. Park 201 Barber Comb Series is exclusively created for the best performance. Smooth and strong. Engineered with gradually-decreasing pitch to facilitate even tension on the hair.The Ultem plastic on this YS Park 201 Barber Comb is very flexible.

Feather Nape Razor Blades 10 pack blades features a mesh guard wrapped around the cutting edge to prevent the blade from cutting into the skin. This guard allows hairdressers to use this blade on their clients and achieve those final touches with a razor that really make a haircut go from good to great. Because of its small design, it's is easy to maneuver in tight areas such as the bikini line, the nape of the neck or other areas of the body for a soft smooth shaving experience. The Nape Blade fits in the Nape & Body Razor. When a blade gets dull, simply replace the blade. The Nape Blades come in a pack of 10 blades.

Naruto Royal Kingdom Yosuki Hennesy Rolling S23 Hair Thinning Scissor.  With the “Royal Kingdom New Bearing” Naruto has created the world’s first Vacuumed Sealed Bearing. The design of this bearing gives greater balance to the operation and movement of the blades. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of rare blended steels and alloying materials. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Yosuki Hennesy B23 is quite simply a true finishing experience with an an advanced tool. Designed with Sintered Powered Cobalt Alloy steel to give the smoothest cut possible. The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one.

Tara XOT-25 cobalt hair thinning shear is a new seamless no line blender and top of the line finishing tool. The Tara XOT-25 designed with high quality Japanese Cobalt Steel, features 180 degree cuts out on the back blade to ensure no line blending, and no snag release when you cut and drag. The Tara XOT-25 thinner is designed with a multi step tooth to give a natural blended effect on the hair. This is one of those finishing tools that is worth the cost. Our Top Recommendation.

Naruto Variation Desert S-19 Hair Thinning Scissors have the  highest percentage of variation, and character due the arrangement and spacing of the teeth. It is used mainly for giving texture and sculpturing the design of the hair style.The blending of the hair is completely natural and it creates volume to the silhouette with No Lines. These Variation Thinners have a several multiple steps cut into each tooth creating a beautiful effect with the hair. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of Sintered Powered Cobalt Alloy Steel, and othe Alloys to give the smoothest cut possible. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Variation is quite simply a true finishing experience with an an advanced tool. Designed with . The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one. Cut Ratio of 5-20%
 



 

Sensei Netural Grip Left Handed shear takes the idea of an offset thumb and extends it forward to where your thumb naturally sits at rest. This removes pressure from the palm of the hand and reduces muscle fatigue. The open neutral thumb position also removes 75% of the travel distance to open and close the shear, and is built to maximize your efficiency and minimize stress on the hand. The NGL is the first step to a healthier, pain free, way of working.Made from a high quality Duralite™ Japanese stainless steel. The tang on this shear is removable and adjustable with the option of a traditional tang as well as the full neutral position. This shear comes in 5.5 and 6.25 inches.

Sensei Open Neutral Grip 23 Tooth Professional Hair Thinning Shear takes the concept of an offset thumb and extends it forward to where your thumb naturally sits at rest. There is not cramping and this concept removes pressure from the palm of the hand, and reduces muscle fatigue. The neutral thumb position removes 75% of the distance required to open and close the shear, and is built to maximize your efficiency, and minimize stress on the hand. This Open SOT-23 Thinner is the first step to a healthier, pain free way of working. Made with high quality  Duralite™ Japanese 440C Stainless Steel. The finger rest on the Open SOT-23 Thinner is removable, and adjustable with the option of a traditional tang as well as the lower full Neutral Position.