Products

The ACRO YURAGI 06 gives a moderately aggressive blending without leaving blocky end notches and excels at creating depth while removing bulk. The Acro Yuragi series has a step-blade which leaves very little demarcation. Acro Yuragi 6 creates a soft finish and blends the hair.

• 19 teeth • Cutting Ratio 25-30% • Blade/Teeth Position: Regular

Mizutani new Z2 Left handed scissor uses Nano technology to give you next level steel called Powder Cobalt Metal Steel which is actually know as Sintered Steel. This method uses high pressure to inject the mixture of alloys into the forging. It Consists of smallest participles, and using this method the manufacturer can obtain a very dense, and the highest quality steel. A very sharp shear with a long lasting blade with a super convex Hamaguri edge. Anatomical (Bent thumb ring for comfort) this shear can point cut, and cut with power small and large sections, and can be used as a go to shear for the bulk of your work. Blade design on Z2 will give more power due to the thicker saber blade desing,and micro step in the edge with give a longer lasting edge.

Teeth: 35-tooth

Sizes: 6.3"

Captain Titan Straight Cut Razor Blades offer incredible sharpness and longevity.The special dispenser, and self contained disposal system allows the use to insert / dispose of the used blades without having to touch them. Each blade goes through the PINK (Plasma, Ion, New Process by KAI.) a process which gives the edge a more acute angle for exquisite cutting performance and durability. Box of 20 Count 


 

Aikyo AM Professional Hair Cutting Shear is designed with V-10 Cobalt Alloy steel, has an offset handle with convex saber blades. The low profile tension Inner click screw system makes it easy to adjust tension when needed. This Aikyo AM shear is one of the lowest priced cobalt alloy shears available. The Aikyo AM will give very good smooth cutting performance and offers a great value. An excellent detail scissor with fine points.

 

Naruto Maticline I S  Hair Cutting Scissor gives a soft cut and feel. The offset crane handle Naruto scissor is 6.3 inch designed with Sintered Cobalt Alloy Steel, and disk bearing Tension system. Excellent for all around and detail cutting at the highest level. The extra length would allow for scissor over comb as well. The quality of Naruto with its sintered steel, and artisan craftsmanship will allow you to cut any section with ease. Below is an image of the bearing disk tension system that will reduce friction and allow user to cut smoothly with less effort, and thumb pressure.

 

KASHO Silver Series Professional hair cutting shears. The Silver Series features a more distinct offset crane handle, which makes them Kasho’s most ergonomic shears. This not only enables your elbow and wrist to rest at a more comfortable position, but also the ring finger placement is lower, so your fingers are more aligned. This is designed to aid in preventing the effects of Carpal Tunnel. Kasho Silver Series is designed with V-10 Cobalt Alloy Steel for smooth and comfortable cutting. The shear has a removable finger rest. New models are available with Straight handle as well. We highly Recommend This Shear.   Tension Key Included..!  Silver Series 6.5 & 7.0 inch are priced higher

Kouho SX Series scissor has become very popular. More power than a traditional stainless steel handle, it has a great feel. Designed with a convex edge and traditional offset handle using a superior Hitachi gold Stainless Steel. Tension control screw has built-in Ball Baring to reduce friction and needed thumb pressure required to cut. The brilliant craftsmanship make Kouho a favorite scissor of ours. A must own tool - you will not be disappointed. Kouho SX is No longer Available.

Mizutani Stellite Alloy Series 1 is a straight even handle scissor. This is a level set handle for both flexibility and stability, and the three dimensional handles fit your hand with any finger position. The short non-slippery finger rests are covered with rubber, and does not interfere with you finger movement. Designed with Stellite Alloy that contains More then 50% Cobalt Stellite Alloy, and a Ball Bearing Tension gives you a powerful smooth cutting scissor.

Naruto Kingdom Stork Megane ST-VS scissor is used for Slide, Stroke, and Chop cuts due to the structure and shape of the scissors.It is also a longer detail scissor that will give you great control, and power. Megane ST-VS is designed with a dual bearing tension system, which has a shaft bearing to reduce friction, and thumb pressure which allows you to cut a thicker section, and a Ball Bearing Disk to smooth out and stabilize the operation and movement of the blades. 

Sizes: 6.3 inch - Offset

Tara XOB Blue Titanium Finish Cobalt Hair Cutting Shear is made of high quality Japanese cobalt steel, with a beautiful Indigo Blue Titanium finish. The Blue is put on the shear with a process called heat nitrating in which the coating is baked on and coated with titanium so it will never wear off. The XOB is fitted with an adjustable click tension control to reduce friction. Has leaf spring plate washer, for balance and to smooth out the opening and closing of the shear. Designed with an slight  offset , with permanent finger rest, and an Anatomical Thumb.The thumb opening is unique and referred to as a clam shell, where the width of the thumb opening is wider and has a much larger area of which to place your thumb.
 

Yasaka SK Classic 7.0 inch Barbering Scissor with ATS-314 Cobalt Steel, with adjustable Tension Screw Dial. Attached permanent finger rest.

Naruto Royal Kingdom Misuki Celing S27 Hair Thinning Scissor.There are two types of bearings packing's for this series depending on the size of the scissors. One has a diameter of 13 mm to the packing and contains 10 ball bearings. The other has a diameter of 16 mm to the packing and it contains 14 ball bearings. The diameter of the ball bearings for both packing's are in the units of millimeter and made out of a metallic material that does not erode away. Very sharp, will allow you to blend and shape hair effortlessly. Attention to detail is the very best. Workmanship is outstanding. Our Highest Recommendation.

Shisato Orion Cobalt Swivel Hair Thinning Scissors 35 Tooth 15 Tooth. Orion thinners are designed with Japanese Cobalt Alloy Steel, and Convex Edge to ensure a smooth blending and thinning. Ergonomic design of the Rotating thumb 360 degrees for a natural hand position, and extra spacing between thumb and finger rings to prevent cramping when closing the thinner. Rotating swivel thumb allows stylists to use all cutting techniques and positions with less tension and strain on the wrist, and medial nerve, helping prevent carpal tunnel, tendonitis or any should or back problems. Swivel Thumb can be locked in position if desired.

Sensei Swivl SL Left Handed Rotating Thumb Professional Hair Cutting Shear is designed to allow you to receive the benefits  ( Less Stress on the wrist ) with its Rotating Thumb with out compressing the palm of your hand. This will give an increased level of control, and performance. It will help you do everything with your hand open, and your wrist straight and your elbow down. Designed with Molybdenum Alloy steel, and convex Edge it will give you the cut you are looking for.

YS Park GI31 Guide Hair Comb are designed with a heat and chemical resistant plastic called Polyetherimide ( PEI ) that can withstand Temperatures up to 428 degrees F. These Guide combs have a built in ruler printed on the edge of the comb. The I means inches, as some of the guide combs are in metric. YS GI31 has the same comb measurements as the normal YS Park 331 cutting comb with the ruler added.

YS Park 111 Quick Tint Tail Hair Comb smooth and strong. Built from durable Ultem-plastic, which is 428°F resistant. Specially-sized for all cutting needs. Engineered with gradually-decreasing pitch 1/100 mm from the previous tooth to facilitate even tension through the entire length of the comb. Has a Parting head which is the shorten first tooth of the comb which allows the use to part, and wind hair very quickly.
 
 

Includes the FEATHER Plier Razor and removable comb guard. Blades sold separately.

Yuroshi YT-35 Tooth Hair Thinning Scissor with C -Type curved Teeth. These curved teeth give a natural finished look, and assist with easy release from the hair. Designed with Japanese Hitachi 440 C Stainless Steel for a smooth cut. We feel the Yuroshi line of thinners and shears have an "above-average" finish work and craftsmanship for this price range. An excellent quality thinner for the low cost.

Model: LC1003

Aikyo SSAT 35 Double Tooth Thinner designed with Cobalt Steel for smooth no line blending.Any thinner with both blades having teeth does two things. It will not leave a line in the hair, and it takes out less hair than a comparable 35 tooth thinner. As the teeth are what cuts, and the gaps or spaces do not.This gives a lower overall percent of hair removal that a singular tooth blade design.The benefit to the stylist is that you can remove just the amount of hair you need and with no lines. Aikyo SSAT 35 is fitted with a click Tension, and comes with a key. Aikyo SSAT 35 has a sculpted Thumb that is slightly anatomical and a permanent fitted finger rest.

Yasaka YS SK30T and SK40T designed with ATS-314 Cobalt Steel Hair Thinning Scissor is a new Yasaka Convex Edge texturing and Blending shear made in Japan. Yasaka shears continue to be popular for their durability and consistent performance and smooth cutting over the years while remaining an excellent value due to their reasonable price. Many of the Yasaka shear designs were classic and remain mostly unchanged today with some minor up grades.

Sensei Neutral Grip 30 Tooth Hair Thinning Shear is your entry into a new way of cutting. This shear’s handle is designed to mimic your hand at rest. This Sensei Neutral Grip Thinner takes the idea of an offset thumb and extends it forward to where you thumb naturally sits at rest. This removes pressure from the palm of the hand and reduces muscle fatigue. The open neutral thumb position also removes 75% of the travel distance to open and close the shear, and is built to maximize your efficiency and minimize stress on the hand. The NG is the first step to a healthier, pain free, way of working. The NGT30 is a non aggressive thinner/blender that gives the user control and takes away the fear of removing too much hair many thinning shears cause.

Sensei Dry Cut Evolution™ Rotating Thumb Hair Cutting Shear takes Dry cutting to a whole new level of precision. It starts with a completely new edge design that allows you a much greater ability to cut dry hair without it moving on the blade. Hydrogen bonds are intact in dry hair making it 30% harder to cut which is why we have invented the Precision Dry Cut Blade design. This added precision, will give speed up your work and give you a new level of control. Of course it’s smooth and precise for wet hair too. Made from Japanese Cobalt Alloy,  Molybdenum , and Vanadium Alloy Steel with Sensei Cryogenically ™ Tempering the precision of this blade will last and last. The tension system also features ball bearings to stabilize the blades for longer life, and reduce friction and thumb pressure. The handle is beautifully sculpted to feel great in your hand. Made in Japan

Tara XYT 30 Tooth Cobalt  Alloy Thinning Shear has a Level Ring Handle style with double finger and inner click adjustable screw system. Its unique style 30 curved teeth offers unlimited cutting techniques.Can be used for horizontal or vertical cut with sticking or holding the hairs. Cutting ratio 15%.

.YS Park 213 Short Hair Design Barber Comb made using Ultem-Plastic to be Strong, flexible and heat resistant. YS 213 comb is engineered with a light weight body,and a dimpled texture for an organic natural feel. It has a comfort grip that has air holes for greater flexibility, and control over each stroke.

Naruto Crab Vista M-II G I hair cutting scissor is a cobalt 5.9 inch scissor with a Straight handle. Crab Vista blade is convex and is designed and manufactured with Naruto craftsmanship. Visa series scissors do not contain the advanced bearing systems but have all the same quality aspects of what Naruto is about Quality. The Naruto Vista series is brought to you at affordable price.