Tara XPB Blue Titanium Hair Cutting Shear

TARA XPB Miracle Steel Hair cutting shear is the best combination Dry cut and pointing tool we have seen.Tara XPB Blue Titanium finish and its unique Multi Alloy Miracle Steel. A combination of Alloys including Super Cobalt Alloy, Carbon, Tungsten. and Molybdenum and others. This combination of alloys allows the XPB to have a Rockwell hardness much higher that all other cobalt alloy shears. The XP hardness is near 70 on the Rockwell scale. This gives a very long lasting blade and edge. The XPB has a creative design that allows the user to cut with no slippage of hair what so ever, none. This is accomplished with the micro slits etched into the tip of the top blade, about 2 inches. The micro slits are cut into the blade using a laser, and are 1/3 the diameter of a hair shaft deep. You can feel them with the tip of your finger nail. The XPB has other features that make it stand out. A Double tapered blade that gives outstanding point cutting and silky smooth cut.

Edge: Convex Edge

Made In: Japan

Material: Miracle Steel

Size(s): 6.3;6.8

Vendor: Tara

Dry Cut : Dry;Wet Cut

Titanium Finish: Blue Titanium Finish

Select a model

XP 5.5 inch ( $1,025.00 )

XP 5.8 inch ( $1,025.00 )

XP 6.3 inch ( $1,025.00 )

XP 6.8 inch ( $1,025.00 )

Total: $1025.00

Material: Miracle Steel
Blade Convex / Micro Slits Tip
Type Of Cutting: Dry or Wet
Vendor: TARA
Made In Japan

The back or bottom blade is wider and this gives the XP the extra power for slide cutting and dry cutting. The XP is a world class and excellent cutting experience. The Tara XP features a comfortable Anatomical thumb and low profile tension button. A must own tool for advanced hair designers. TARA XP is one of finest multi purpose cutting shears in the industry. Our Top Recommendation.!

Sizes: 6.3 inch 6.8 inch

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.