Hair Thinning Shears & Scissors

Kokoro Black Series 33 Tooth Thinner designed with Japanese AUS8: forged Stainless Steel. Blade is finished with a convex edge, has slight offset handle. Tension is a low profile button for easy adjustment and removable finger rest.

Aikyo ADRT-30 Tooth Thinner designed with V-10 Cobalt Steel offers a smooth texturing.Teeth on the Aikyo ADRT-30 is designed with curved teeth, and each tooth is designed and cut with 3 steps, to allow for easy cut and drag release from the hair and no demarcation line.Has a dual finger rest and set up to flip and use with the teeth on the reverse side.Tenison can be adjusted with internal  click system a key is provided to use.

Kasho SASA Hair Thinning shear is Japanese for bamboo leaf and these shears feature wider blades with a more rounded profile. The Green Series SASA Blending Shears are designed for exquisitely smooth wet or dry fine cutting. SASA has V-10 Cobalt Alloy steel for a great edge and smooth blending. The 38 tooth features a new step-down design where the notch at the end releases the hair after cutting. The base of the teeth step-down smaller to leave more room for the uncut hair to slide smoothly through when you pull the shears out, which means there is less chance of pulling or snagging the hair. The SASA  a comfortable offset handle design.

Kouho KGT-SNL hair thinning scissor with 27 Teeth is designed with very high grade stainless steel. The KGT has a removable finger rest. The craftsmanship is excellent on each Kouho scissor, and the KGT will give a high level of performance. Kouho KGT blender is comfortable in the hand and easy to control. Each tooth on the KGT Teeth are designed with 3 steps and will reduce most demarcation lines and release easily when your drag on the hair. Kouho KGT is an excellent choice of a high level multi purpose use blending tool. This is the same blender are the Kouho ARX but with a straight handle.
Kouho KGT-SNL Thinner is No Longer Available.

Mizutani ACRO Z DUAL ZD-4 dual thinning scissors enabled the stroke cut technique. Even when you cut hair with moving scissors, hair does not jam because there is no cutting blade. The Z Dual is not only for blending hair, it gives hair an airily and movement to the style. Acro Dual leaves no line when you use this tool to blend and remove weight.This is the new thinning scissors, you can use on your clients, and  can keep the style long after hair grows. The straight ZD-3 or offset ZD-4 the handles are easy to fit to your hand, and very comfortable. ZD-4 third generation blending scissors generate micro- bunches that give the tips of the hair a three-dimensional feel. With these thinning scissors, you can now easily produce sculpted three dimensional tips.

Matsuzaki VDR 4 Star Cobalt Thinning shear has been redesigned now this blender to features a multi 3 step tooth configuration on the VDR6030F  for easy cut an drag capability. Made with cobalt alloy steel. Now this blender has two new options with the addition of the VDR6020F a 20 Tooth design with a two step tooth design and cut Ratio of 20%, and the VDR6010F a 10 Tooth 2 step tooth design with 10% cut Ratio. The VDR30F would make an excellent all purpose blender.

Naruto Kingdom Stork Nisuki Aeroline Two Handed S 29 Tooth Hair Thinning Scissors are used mainly used for Slide, Stroke, and Chop cuts due to the structure and shape of the scissors. At 5.6 inch user has great control for detail work. Designed with a special Powered Martensite Cobalt Alloy Steel with other alloys this thinner has a dual bearing tension system. One bearing is the shaft bearing to reduce thumb pressure, and a disk baring the ensure smooth movement and operation of the blade movement. Attention to detail is the best, and straight handle lets you flip these Naruto blenders if you desire. All Naruto products are made with simply the best craftsmanship. Our highest Recommendation on All Naruto Scissors. The S29 teeth have been desinged to give a Cut Ratio 20-25% slightly more than the S-29.T.

Kokoro Ivory Series 33 Tooth Hair Thinning shear is a quality professional offset handle thinner that offers an excellent value. This new Ivory series has extra blade refinement which allows for an improved cut and feel for the stylist. The offset handle will allow for a comfortable position with the elbow being lower, and this levels the wrist to prevent carpal tunnel. The Japanese 440C Stainless Steel is vacuum heat treated which ensures consistent cut with equal hardness throughout the entire blade.

Shisato Mirage B 15 Tooth No Line Texturizer will save time and effort. Each blade has teeth which are designed to hide line of demarcation in the hair.These double teeth thinners where both blades have teeth will remove less hair than a normal 15 tooth will. This will allow you to go back and adjust the perfect amount of removal to your needs and desired look. This is a high quality tool made with Hitachi Japanese V-10 Cobalt Alloy Steel, and it will make texturizing very smooth. Lift Time Warranty. Has a long reach 6.5 inch length, and comfortable offset handle.

Yasaka YS 300 30 Tooth ATS-314 Cobalt Hair Thinning Scissors is a convex edge texturing shear made in Japan with high quality Cobalt Alloy steel. Yasaka shears continue to be popular for their durability and consistent performance over the years while remaining an excellent value due to their reasonable price. Many of the Yasaka shear designs were classic and remain mostly unchanged today with some minor up grades.

Yuroshi CT-30 Hair Thinning Scissor with Curved C Type Teeth that have a unique varied width tooth design. This will give a more natural texture to a finished look. Each tooth has been cut in a multiple step design. This hides the lines, and cuts with less effort, and releases from the hair with ease. Yuroshi thinners have excellent craftsmanship and great attention to detail, and we consider them an great value.You will be impressed with any Yuroshi product.

Naruto Royal Kingdom Yosuki Hennesy Rolling S23 Hair Thinning Scissor.  With the “Royal Kingdom New Bearing” Naruto has created the world’s first Vacuumed Sealed Bearing. The design of this bearing gives greater balance to the operation and movement of the blades. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of rare blended steels and alloying materials. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Yosuki Hennesy B23 is quite simply a true finishing experience with an an advanced tool. Designed with Sintered Powered Cobalt Alloy steel to give the smoothest cut possible. The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one.

Tara XOT-25 cobalt hair thinning shear is a new seamless no line blender and top of the line finishing tool. The Tara XOT-25 designed with high quality Japanese Cobalt Steel, features 180 degree cuts out on the back blade to ensure no line blending, and no snag release when you cut and drag. The Tara XOT-25 thinner is designed with a multi step tooth to give a natural blended effect on the hair. This is one of those finishing tools that is worth the cost. Our Top Recommendation.

Naruto Variation Desert S-19 Hair Thinning Scissors have the  highest percentage of variation, and character due the arrangement and spacing of the teeth. It is used mainly for giving texture and sculpturing the design of the hair style.The blending of the hair is completely natural and it creates volume to the silhouette with No Lines. These Variation Thinners have a several multiple steps cut into each tooth creating a beautiful effect with the hair. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of Sintered Powered Cobalt Alloy Steel, and othe Alloys to give the smoothest cut possible. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Variation is quite simply a true finishing experience with an an advanced tool. Designed with . The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one. Cut Ratio of 5-20%
 



 

Sensei Open Neutral Grip 20 Tooth Professional Hair Thinning Shear takes the concept of an offset thumb and extends it forward to where your thumb naturally sits at rest. There is not cramping and this concept removes pressure from the palm of the hand, and reduces muscle fatigue. The neutral thumb position removes 75% of the distance required to open and close the shear, and is built to maximize your efficiency, and minimize stress on the hand. This Open SOT-20 Thinner is the first step to a healthier, pain free way of working. Made with high quality  Duralite™ Japanese 440C Stainless Steel. The finger rest on the Open SOT-20 Thinner is removable, and adjustable with the option of a traditional tang as well as the lower full Neutral Position.  




 

Aikyo ADRT-22 Tooth Thinner designed with V-10 Cobalt Steel offers a smooth texturing.Teeth on the Aikyo ADRT-22 are designed with a curve, and each tooth has designed and cut with 3 steps, to allow for easy cut and drag release from the hair and no demarcation line.Has a dual finger rest and set up to flip and use with the teeth on the reverse side.Tenison can be adjusted with internal  click system a key is provided to use.

  

The ACRO YURAGI 00 very gently removes only 10% of the hair with each cut allowing for a precise shaping and the perfect sculpted look.The Yuragi series has a step-blade which leaves very a very little line of demarcation. Acro Yuragi 00  blends the hair, it  removes the least amount of hair if you don't mind cutting 3-4 times to see the texture. It will carefully sculpt the shape of the hair.

A gentle thinning shear that will not stress, or damage the hair.
 

• “Step-blade” creates soft bite and smooth withdrawal, leaves minimal hair lines.
• A natural settling feel as if the cut was done several weeks ago.

 • 21 teeth • Cutting Ratio 10% • Blade/Teeth Position: Regular. 

Shisato Mirage B Hair Thinning Scissors are unique blenders that teeth on both blades, and do not leave a perceptible line in the hair. Designed with Japanese V-10 Cobalt Steel, and comfortable ergonomic hand design. Hair removal is less than other blenders with same amount of teeth due to twice the amount of gaps both on top and bottom blades. We feel this is one of the best blenders for men's hair cuts, and scissor over comb that we have seen. Any stylist will be impressed with the great performance and smooth cutting of these unique blenders.
 
 

Yasaka YS 40 40 Tooth ATS-314 Cobalt Hair Thinning Scissors is a convex edge texturing shear made in Japan with high quality Cobalt Alloy steel. Yasaka shears continue to be popular for their durability and consistent performance over the years while remaining an excellent value due to their reasonable price. Many of the Yasaka shear designs were classic and remain mostly unchanged today with some minor up grades.

Naruto Royal Kingdom Nisuki Hennesy Rolling S27 Hair Thinning Scissor.  With the “Royal Kingdom New Bearing” Naruto has created the world’s first Vacuumed Sealed Bearing. The design of this bearing gives greater balance to the operation and movement of the blades. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of rare blended steels and alloying materials. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Yosuki Hennesy B23 is quite simply a true finishing experience with an an advanced tool. Designed with Sintered Powered Cobalt Alloy steel to give the smoothest cut possible. The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one.

Yuroshi YGT-30 Tooth Hair Thinning Scissor with C -Type curved Teeth. These curved teeth give a natural finished look, and assist with easy release from the hair. Designed with Japanese V-10 Cobalt Steel for a smooth cut, precision texturing, and blending. We feel the Yuroshi line of thinners and shears have an "above-average" finish work and craftsmanship for this price range. An excellent quality thinner for the low cost.



 

Naruto Variation Desert B-19 Hair Thinning Scissors have the  highest percentage of variation, and character due the arrangement and spacing of the teeth. It is used mainly for giving texture and sculpturing the design of the hair style.The blending of the hair is completely natural and it creates volume to the silhouette with No Lines. These Variation Thinners have a several multiple steps cut into each tooth creating a beautiful effect with the hair. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of Sintered Powered Cobalt Alloy Steel, and othe Alloys to give the smoothest cut possible. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Variation is quite simply a true finishing experience with an an advanced tool. Designed with . The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one. Cut Ratio of 5-20%
 
The S model has teeth in front and the B is a reverse with teeth on rear blade.

 

Kokoro Green Series KGR T15 Tooth Texturing shear is a quality professional offset crane handle texturing shear that offers an excellent value. This new Green series has extra blade refinement which allows for an improved cut and feel for the stylist. The offset crane handle will allow for a comfortable cutting position with the elbow being lower, and this levels the wrist to prevent carpal tunnel.Japanese Hitachi 440C Stainless Steel is vacuum heat treated, and cryogenically tempered which will ensure consistent cut with equal hardness throughout the blade, and each tooth. Kokoro Green series has a low profile tension knob, and the Kokoro Lifetime Warranty.

Sensei Open Neutral Grip 40 Tooth Professional Hair Thinning Shear takes the concept of an offset thumb and extends it forward to where your thumb naturally sits at rest. There is not cramping and this concept removes pressure from the palm of the hand, and reduces muscle fatigue. The neutral thumb position removes 75% of the distance required to open and close the shear, and is built to maximize your efficiency, and minimize stress on the hand. This Open SOT-40 Thinner is the first step to a healthier, pain free way of working. Made with high quality  Duralite™ Japanese 440C Stainless Steel. The finger rest on the Open SOT-40 Thinner is removable, and adjustable with the option of a traditional tang as well as the lower full Neutral Position. 


 

Tara XOT-30 cobalt hair thinning shear is a new seamless no line blender and top of the line finishing tool. The Tara XOT-30 designed with high quality Japanese Cobalt Steel, features 180 degree cuts out on the back blade to ensure no line blending, and no snag release when you cut and drag. The Tara XOT-30 thinner is designed with a multi-step tooth to give a natural blended effect on the hair. The XOT-30 model has a newly designed handle and is the same as the TARA XOT-25. Image coming soon This is one of those finishing tools that is worth the cost. Our Top Recommendation.



Cutting ratio 15% to 20% depending the angle of the blade. Great Tool for skillful stylist. Turn the thinner towards the head and increase the amount of hair removed. .

Naruto Kingdom Stork Nisuki Aeroline Two Handed S 29 T Hair Thinning Scissors with special thinner blade are used mainly used for Slide, Stroke, and Chop cuts due to the structure and shape of the scissors. At 5.6 inch user has great control for detail work only 10-15% cut percentage.Designed with a special Powered Martensite Cobalt Alloy Steel with other alloys this thinner has a dual bearing tension system. One bearing is the shaft bearing to reduce thumb pressure, and a disk baring the ensure smooth movement and operation of the blade movement. Attention to detail is the best, and straight handle lets you flip these Naruto blenders if you desire. All Naruto products are made with simply the best craftsmanship. Our highest Recommendation on All Naruto Scissors.

The ACRO YURAGI 04 removes slightly more hair at 15% but still creates a delicate finish leaving fine blending for a sensitive texture. The Acro Yuragi series has a step-blade which leaves very little demarcation. Acro Yuragi 4 creates a delicate finish and blends the hair.

 

Naruto Leo Vista HT Hair Thinning Scissors. Naruto Leo Vista HTS Thinners are designed with offset handle and Cobalt steel. Made with the quality standards of Naruto.

Kokoro Green Series 40 Tooth Hair Thinning shear is a quality professional offset crane handle thinner that offers an excellent value. This new Green series has extra blade refinement which allows for an improved cut and feel for the stylist. The offset crane handle will allow for a comfortable position with the elbow being lower, and this levels the wrist to prevent carpal tunnel. The Japanese 440C Stainless Steel is vacuum heat treated which will ensure consistent cut with equal hardness throughout the entire blade.

Shisato Mirage Black Onyx Double Blade 30 Tooth Hair Thinning Scissor features a Black Titanium Finish, and has teeth on both blades and does not leave a line of demarcation in the hair. Designed with Japanese V-10 Cobalt Steel, and comfortable ergonomic hand design. Hair removal is less than other blenders with same amount of teeth due to twice the amount of gaps both on top and bottom blades. We feel this is a great blender for men's hair cuts, and scissor over comb. Any stylist will be impressed with the great performance and smooth cutting of these unique blenders